64
9. Install the bolts in the side holes of the panel
with the handle. The bolt threads should
emerge from the panel on the handle side.
Lock the bolts in place by threading the nuts
onto them.
10.Grab the handles and bring the final panel to
the window. Place the top of the panel into
the top track. Pull the panel toward yourself.
The bolts should fit into the holes on the
already installed panels. Tighten wing nuts
onto the bolts.
11. Repeat the process at other openings on the
second floor.
HOME TIP: Some homes have a balcony.
If yours does, find the floor tracks in the
garage attic and install them. Remove the
tracks from the balcony after use as they
can be a safety hazard.
Optional: Installation of storm panels on
glass block windows
Some storm panels that cover glass block
windows attach with fasteners to the side of the
home. If your home has glass block windows,
follow these installation steps:
1. Take out the four screws from the wall
around the window.
2. Find the four keyhole washers in the bag
of hardware.
3. Slide a washer onto each bolt.
4. Hold the panel against the wall.
5. Fasten the panel to the wall.
Homeowners association
If your home is part of a homeowners
association, check with it regarding exterior
maintenance. You should be familiar with what
you can and cannot do and what maintenance
items the association is responsible.
