91
With a plunger
1. Add enough water so the plunger cup is
covered completely.
2. Push down the plunger so the cup covers the
drain opening completely. Build pressure in
the pipe by moving the plunger up and down
10 to 20 times in a row. Maintain the seal
between the plunger and drain as you pump
up and down.
3. Remove the plunger. The water should drain.
If not, repeat steps 1 and 2.
Opening the trap
If a plunger doesn’t work, try opening the
drain trap.
1. Set an empty bucket or pan beneath the trap.
